Hawk GUI Training

1. Logging into Hawk GUI
2. Preferences
   1. Channel Types
   2. Define an Engine
3. Adding Devices to a Test Cell
4. Create a Configuration
   1. Add Channels to a Configuration
   2. Calibration Types
      1. Using TEDS - Works with mV/EU and SPL
      2. mV/EU Calibration
      3. AC Calibration
      4. DC Calibration
      5. Manual Calibration
      6. Shunt Calibration
   3. Setup Signal Conditioning
   4. Define Real Time Alarms
      1. Broadband Alarms
      2. Frequency Alarms
   5. Define Channel Groups (if desired)
5. System Level Calibration (Not Specific to one Configuration)
   1. Component Calibration
   2. Facility Calibration
6. Data Acquisition
   1. Start Recording Data
   2. Available Disk Space
   3. Manoeuvres
   4. Signal Calibration Bus Controls
   5. Live Signal Conditioning Controls
   6. Triggers
   7. Authorize Data and Authorization Modes
7. Post Acquisition
   1. Replay Data
   2. Data Management